Introduction

Bicycles are popular and versatile means of transportation, and the chain is one of their most important components. It ensures the transmission of power from the pedals to the rear wheel, thus enabling efficient two-wheel travel. However, the chain can fall off or become loose, which can make it difficult to use the bike. In this article, we'll explore two options for putting a chain back on a bike and provide detailed methods for each option.

How to put a chain back on a bike: Option 1

To get started, make sure you have a suitable tool for opening and closing the chain, as well as a clean piece of cloth. First, check that the bike chain is clean and free of dirt or debris. If necessary, clean it with a brush and a special degreaser.

Then use the appropriate tool to loosen the chain. This can be either a chain breaker or a chain wrench. Be sure to turn the nuts or bolts properly to release the chain. While holding the chain with your hand, gently pull on the pedal to give it even movement and release tension from the chain.

After you have completely unwound the chain, check for any damage or damage to the pins or plates. If so, replace these components to avoid further problems. Before proceeding, make sure the new chain fits your bike and has the same number of pins as the old one.

How to put a chain back on a bike: Option 2

To begin, make sure the new chain is ready for mounting. It must be clean and lubricated with a suitable lubricant to ensure smooth operation and longer life. Before proceeding, check that the new chain is the same length as the old one. If it is too long, you will need to shorten it using a chain breaker.

Next, position the new chain on the rear wheel of the bike and start threading it through the chain case and guide roller. Make sure the chain is correctly positioned on the freewheel teeth and on the derailleur. Place the chain on the freewheel pins and make sure it is in the correct position.

Next, run the new chain through the derailleur and make sure it is correctly positioned in all gears. Pull the pedal gently to tension the chain and make sure it is working properly. Before closing the chain, check that it moves smoothly and without tangling.

Conclusion: Detailed methods for putting a chain back on a bicycle

In this article, we've explored two options for putting a chain back on a bike and provided detailed methods for each option. Whichever option you choose, it's important to have the right tools on hand and pay attention to detail. Clean and check the chain before starting work and replace any defective components. Make sure the new chain fits your bike and is correctly positioned on the wheel and derailleur. Tension it and check that it works properly before closing the chain.